Wednesday, June 29, 2011
29/06/11
Yesss finallly finished the movie and storyboard. Now the whole class is watching it and its really embrassing :(
Tuesday, June 28, 2011
Data Compression
What is Data Compression:
data compression, source coding or bit-rate reduction is the process of encoding information using fewer bits than the original representation would use.
In some systems the two techniques are combined, with transform codecs being used to compress the error signals generated by the predictive stage.
Lossless data compression make use of data compression algorithms that allows the exact original data to be reconstructed from the compressed data. This can be contrasted to lossy data compression, which does not allow the exact original data to be reconstructed from the compressed data. Lossless data compression is used in many applications. For example, it is used in the popular ZIP file format and in the Unix tool gzip. It is also often used as a component within lossy data compression technologies. The advantage of lossy methods over lossless methods is that in some cases a lossy method can produce a much smaller compressed file than any known lossless method, while still meeting the requirements of the application.
Lossy methods are most often used for compressing sound, images or videos. The compression ratio (that is, the size of the compressed file compared to that of the uncompressed file) of lossy video codecs are nearly always far superior to those of the audio and still-image equivalents. Audio can be compressed at 10:1 with no noticeable loss of quality, video can be compressed immensely with little visible quality loss, eg 300:1. Lossily compressed still images are often compressed to 1/10th their original size, as with audio, but the quality loss is more noticeable, especially on closer inspection.
When a user acquires a lossily-compressed file, (for example, to reduce download-time) the retrieved file can be quite different from the original at the bit level while being indistinguishable to the human ear or eye for most practical purposes. Many methods focus on the idiosyncrasies of the human anatomy, taking into account, for example, that the human eye can see only certain frequencies of light. The psycho-acoustic model describes how sound can be highly compressed without degrading the perceived quality of the sound. Flaws caused by lossy compression that are noticeable to the human eye or ear are known as compression artifacts.Lossless compression algorithms usually exploit statistical redundancy in such a way as to represent the sender's data more concisely, but nevertheless perfectly. Lossless compression is possible because most real-world data has statistical redundancy. For example, in English text, the letter 'e' is much more common than the letter 'z', and the probability that the letter 'q' will be followed by the letter 'z' is very small.
Another kind of compression, called lossy data compression, is possible if some loss of fidelity is acceptable. For example, a person viewing a picture or television video scene might not notice if some of its finest details are removed or not represented perfectly. Similarly, two clips of audio may be perceived as the same to a listener even though one is missing details found in the other. Lossy data compression algorithms introduce relatively minor differences and represent the picture, video, or audio using fewer bits.
Lossless compression schemes are reversible so that the original data can be reconstructed, while lossy schemes accept some loss of data in order to achieve higher compression. However, lossless data compression algorithms will always fail to compress some files; indeed, any compression algorithm will necessarily fail to compress any data containing no discernible patterns. Attempts to compress data that has been compressed already will therefore usually result in an expansion, as will attempts to compress encrypted data.
In practice, lossy data compression will also come to a point where compressing again does not work, although an extremely lossy algorithm, which for example always removes the last byte of a file, will always compress a file up to the point where it is empty
The video can be compressed at a 100:1 ratio
Audio can often be compressed at a 10:1
Still images are also often compressed at a 10:1 ratio.
The compression rate of lossy compression is about 5-6% while the rate of lossless compression ranges from 50 60%. .
data compression, source coding or bit-rate reduction is the process of encoding information using fewer bits than the original representation would use.
What is a data compression ratio?
Data compression ratio, also known as compression power, is a computer-science term used to quantify the reduction in data-representation size produced by a data compression algorithm. The data compression ratio is analogous to the physical compression ratio used to measure physical compression of substances, and is defined in the same way, as the ratio between the compressed size and the uncompressed size: [1]Why is data compression an important technique for the online world?
It reduces the amount of data stored on a hard disk or transmission of bandwidth.
What is the difference between Lossy and Lossless data compression?
A lossy data compression method is one where compressing data and then decompressing it retrieves data that may well be different from the original, but is "close enough" to be useful in some way. Lossy data compression is used frequently on the Internet and especially in streaming media and telephony applications. These methods are typically referred to as codecs in this context. Most lossy data compression formats suffer from generation loss: repeatedly compressing and decompressing the file will cause it to progressively lose quality. This is in contrast with lossless data compression.
Types of lossy compression
There are two basic lossy compression schemes:
- In lossy transform codecs, samples of picture or sound are taken, chopped into small segments, transformed into a new basis space, and quantized. The resulting quantized values are then entropy coded.
- In lossy predictive codecs, previous and/or subsequent decoded data is used to predict the current sound sample or image frame. The error between the predicted data and the real data, together with any extra information needed to reproduce the prediction, is then quantized and coded.
In some systems the two techniques are combined, with transform codecs being used to compress the error signals generated by the predictive stage.
Lossless data compression make use of data compression algorithms that allows the exact original data to be reconstructed from the compressed data. This can be contrasted to lossy data compression, which does not allow the exact original data to be reconstructed from the compressed data. Lossless data compression is used in many applications. For example, it is used in the popular ZIP file format and in the Unix tool gzip. It is also often used as a component within lossy data compression technologies. The advantage of lossy methods over lossless methods is that in some cases a lossy method can produce a much smaller compressed file than any known lossless method, while still meeting the requirements of the application.
Lossy methods are most often used for compressing sound, images or videos. The compression ratio (that is, the size of the compressed file compared to that of the uncompressed file) of lossy video codecs are nearly always far superior to those of the audio and still-image equivalents. Audio can be compressed at 10:1 with no noticeable loss of quality, video can be compressed immensely with little visible quality loss, eg 300:1. Lossily compressed still images are often compressed to 1/10th their original size, as with audio, but the quality loss is more noticeable, especially on closer inspection.
When a user acquires a lossily-compressed file, (for example, to reduce download-time) the retrieved file can be quite different from the original at the bit level while being indistinguishable to the human ear or eye for most practical purposes. Many methods focus on the idiosyncrasies of the human anatomy, taking into account, for example, that the human eye can see only certain frequencies of light. The psycho-acoustic model describes how sound can be highly compressed without degrading the perceived quality of the sound. Flaws caused by lossy compression that are noticeable to the human eye or ear are known as compression artifacts.
Another kind of compression, called lossy data compression, is possible if some loss of fidelity is acceptable. For example, a person viewing a picture or television video scene might not notice if some of its finest details are removed or not represented perfectly. Similarly, two clips of audio may be perceived as the same to a listener even though one is missing details found in the other. Lossy data compression algorithms introduce relatively minor differences and represent the picture, video, or audio using fewer bits.
Lossless compression schemes are reversible so that the original data can be reconstructed, while lossy schemes accept some loss of data in order to achieve higher compression. However, lossless data compression algorithms will always fail to compress some files; indeed, any compression algorithm will necessarily fail to compress any data containing no discernible patterns. Attempts to compress data that has been compressed already will therefore usually result in an expansion, as will attempts to compress encrypted data.
In practice, lossy data compression will also come to a point where compressing again does not work, although an extremely lossy algorithm, which for example always removes the last byte of a file, will always compress a file up to the point where it is empty
Which method offers the greatest compression ratio?
The method that offers the greatest compression ratio is lossy compression. The compression ratio of lossy video codecs are generally better than audio and still-image.The video can be compressed at a 100:1 ratio
Audio can often be compressed at a 10:1
Still images are also often compressed at a 10:1 ratio.
The compression rate of lossy compression is about 5-6% while the rate of lossless compression ranges from 50 60%. .
Why is human psychology and perception an important factor in methods of Lossy compression?
This is because in lossy compressions, very little of the information from a file is still there. Without the deception of how the human eye sees the difference of information, the file would be very different from the original. If we allow our mind to do so would be able to the errors in a lossy compression.
Name Lossy file formats for audio, still image and video format.
Audio:
MP3 - .mp3
WMA - .wma
Still Image:
CPC - .cpc
DjVu - .djvu .djv
JPEG - .jpg .jpeg
Video:
DV - .dv .dif
MPEG-1 - .mpg .mpeg .mp2 .mp3 .mpa
MPEG-2 - .mpg .mpeg .mp2 .mp3 .m2v
Introduction to Video
What are some advantages of digital video?
- Single-pass, analog-type impairments are non-cumulative if the signal stays digital. However, a concatenation of digital black boxes using analog interfaces leads to cumulative analog signal degradations and should be avoided.
- There is a reduced sensitivity to noise and interference.
- Digital equipment efficiently and economically performs tasks that are difficult or impossible to perform using analog technology.
- It is amenable to the application of techniques for efficient retention of essential information such as compression.
What is meant by frame rate in video?
A film frame, or just frame, is one of the many single photographic images in a motion picture. The individual frames are separated by frame lines. Normally, 24 frames are needed for one second of film. In ordinary filming, the frames are photographed automatically, one after the other, in a movie camera. In special effects or animation filming, the frames are often shot one at a time.Are all videos/movies the same frame rate, explain your answer?
No, not all videos or movies are the same frame rate, so videos/movies may be slower by frame thanothers. Like for example an interview or horror movie frames wouldnt go as fast as a non stop action movie.
What is meant by resolution, how is it measured?
Definition: Resolution is the term used to describe the number of dots, or pixels, used to display an image. Higher resolutions mean that more pixels are used to create the image, resulting in a crisper, cleaner image. The display, or resolution on a monitor, is composed of thousands of pixels or dots. This display is indicated by a number combination, such as 800 x 600. This indicates that there are 800 dots horizontally across the monitor, by 600 lines of dots vertically, equaling 480,000 dots that make up the image you see on the screen.
Examples:
The resolution setting on the computer monitor was set for 800 pixels wide by 600 pixels deep.
How is it measured?:
Resolution is Measured in Pixels
- The resolution of a monitor is measured in picture elements, or "pixels" for short. Pixels are tiny dots that display on a computer monitor in one of millions of colors, shades and hues. To the viewer, the many pixels in a computer monitor combine to form a viewable picture.
Vertical Measurements
- The first consideration in measuring a monitor's resolution is the number of lines displayed on the monitor from top to bottom. While a traditional television display may consist of about 480 lines, higher resolution computer monitors squeeze at least 1080 lines onto the display.
Horizontal Measurements
- Each of the many lines measured in Section Two above is comprised of hundreds or thousands of tiny dots (pixels). Generally, the number of pixels contained in a line is proportional to the number of lines in the monitor's display; more lines means more dots in each line.
Resolution is Measured in Horizontal x Vertical Pixels
- When a monitor's resolution is described, the description generally consists of the number of dots (pixels) contained in each line followed by the number of lines on the monitor. For example, a 1600 x 1200 display would contain 1600 pixels per line and display 1200 lines. An older monitor that displays resolutions of 640 x 480 would display 480 lines containing 640 pixels each. By this measurement, the number of dots per line can be multiplied by the number of lines to identify the total number of pixels displayed by the monitor. Using the examples above, a 1600 x1 200 monitor would display 1,920,000 individual pixels. An older monitor with a resolution of 640 x 480 would display 307,200 individual pixels. Because the individual pixels combine to display a complete picture, a higher number of pixels generally means a clearer picture.
What is the colour system called RGB?
The RGB color model is an additive color model in which red, green, and blue light is added together in various ways to reproduce a broad array of colors. The name of the model comes from the initials of the three additive primary colors, red, green, and blue.The main purpose of the RGB color model is for the sensing, representation, and display of images in electronic systems, such as televisions and computers, though it has also been used in conventional photography. Before the electronic age, the RGB color model already had a solid theory behind it, based in human perception of colors.
RGB is a device-dependent color model: different devices detect or reproduce a given RGB value differently, since the color elements (such as phosphors or dyes) and their response to the individual R, G, and B levels vary from manufacturer to manufacturer, or even in the same device over time. Thus an RGB value does not define the same color across devices without some kind of color management.
Typical RGB input devices are color TV and video cameras, image scanners, and digital cameras. Typical RGB output devices are TV sets of various technologies (CRT, LCD, plasma, etc.), computer and mobile phone displays, video projectors, multicolor LED displays, and large screens such as JumboTron, etc. Color printers, on the other hand, are not RGB devices, but subtractive color devices (typically CMYK color model).
Explain the video standards PAL, NTSC, and SECAM, what are the main differences between them?
There are 3 main analog video standards in use around the world.PAL (Phase Alternating Line)
NTSC (National Television System Committee)
SECAM (Séquentiel Couleur à Mémoire—Sequential Color with Memory)
Each standard is incompatible with the other two. Also, the equipment that demodulates the signal must be formatted for that signal.
Generally NTSC is used in North America, most of the countries in South America and Japan. PAL is the format for the UK and most European countries except France and parts of Eastern Europe which use SECAM. For example, a recording made in the France could not be played on an American VCR.
If you view video tapes that are from outside of the United States, or send videos abroad, you must first convert the tape to or from the foreign television standard.
This table illustrates the differences between the video standards:
Research Task
To view my HD Script CLick Here
NTSC M | PAL B,G,H | PAL I | PAL N | PAL M | SECAM B,G,H | SECAM D,K,K’,L | |
| Lines/Fields | 525/60 | 625/50 | 625/50 | 625/50 | 525/60 | 625/50 | 625/50 |
| Horizontal Frequency | 15.734 kHz | 15.625 kHz | 15.625 kHz | 15.625 kHz | 15.750 kHz | 15.625 kHz | 15.625 kHz |
| Vertical Frequency | 60 Hz | 50 Hz | 50 Hz | 50 Hz | 60 Hz | 50 Hz | 50 Hz |
| Color Subcarrier Frequency | 3.579545 MHz | 4.43361875 MHz | 4.43361875 MHz | 3.582056 MHz | 3.575611 MHz | ||
| Video Bandwidth | 4.2 MHz | 5.0 MHz | 5.5 MHz | 4.2 MHz | 4.2 MHz | 5.0 MHz | 6.0 MHz |
| Sound Carrier | 4.5 MHz | 5.5 MHz | 5.9996 MHz | 4.5 MHz | 4.5 MHz | 5.5 MHz | 6.5 |
What Standard do we use in Australia? What is an IEEE 1394 port?
We pretty much use PAL
We pretty much use PAL
a high-speed, serial input/output bus for computer peripherals and consumer electronics, capable of transfer speeds of up to 400 megabits per second.
- PRO: fastest external input/output bus available; supports up to 63 devices at once; optimal for bandwidth-hungry devices such as digital video cameras and external storage devices.
- CON: not as widely implemented as Universal Serial Bus; needs fast CPU.
- Why do digital video cameras use video compression? Firstly Video compression refers to reducing the quantity of data used to represent digital video images, and is a combination of spatial image compression and temporal motion compensation. Video compression is an example of the concept of source coding in Information theory. This article deals with its applications: compressed video can effectively reduce the bandwidth required to transmit video via terrestrial broadcast, via cable TV, or via satellite TV services. Digital Video Cameras use video compression because its easier to store something large.
What is meant by “generation loss”, where does it happen?Any time the footage has to be recompressed results in a generation loss. For example, colour correction, super imposed titles, a cross dissolve.Generation loss refers to the loss of quality and potential increase of file size between subsequent copies of data. Anything that reduces the quality of the representation when copying, and would cause further reduction in quality on making a copy of the copy, can be considered a form of generation loss. Mostly in Analog Systems where is most likely to occur is because of the noise that the bandwidth and amplifiers make.
Describe what a codec is.A codec is a device or computer program capable of encoding and/or decoding a digital data stream or signal.The word codec is a portmanteau of 'compressor-decompressor' or, more commonly, 'coder-decoder'.
28/06/11
Today was the final week of when our assignment is due. I am really excited because all our hard work and effort has been put into this video and finally we finished it today. Ahhh now i know how much trouble directors and editors feel. We are finishing off the storyboard tomorrow and uploading to sharepoint tomorrow as well. We have trimmed and splited most of the scenes which makes thevideo run smoothly. We have used the Songs "US" and "Green Day" as a backing track and we have muted the music where a dialogue needs to be heard. Kate told me that she was going to post the final video on her blog and make it private so only her followers (like me) could view it. Unfortunatly I really want the final because I was supposed to edit it.
OVERALL
We are nearly done Hooray :)
OVERALL
We are nearly done Hooray :)
28/06/11
Second last lesson of IST this term.Finishing storyboard and filming ending. Nearly Done! YAY
Thursday, June 23, 2011
IDEASSSSS :)
Chelsea came up with this fabulous idea of having a starring thing in the beginning which kind of looks like this:Video
We have also made a special thanks video but we are going to add that to our blogs later
We have also made a special thanks video but we are going to add that to our blogs later
Subscribe to:
Posts (Atom)
